![]() |
|
![]() |
![]() |
![]() |
|
|
|
|
|
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|
the
only Active, Wide-Band
In-Building Wireless Booster System Seemlessly integrate and boost any radio signal from 150 MHz to 2700 MHz into one single hardware solution. |
![]() |
Zinwave's system technology provides a
unified wireless indoor coverage solution, enhancing wireless
performance and eliminating the blindspots caused by structural
interference. By transporting a wideband frequency range throughout the
system without altering the signal Zinwave has the only active DAS
system to offer true wideband coverage over long distances.
System
3000 Hub
| Zinwave
utilises a modular system design, which adds another dimension of
flexibility to the 3000 DAS and allows the same set of equipment to be used for a wide variety of different installations. Primary and Secondary Hubs use the same chassis with their function defined by the modules inserted in them. With as few as 4 components Zinwave's 3000 DAS can be tailored to suit every environment and building topology in the most cost effective way. |
![]() |
Zinwave utilises a modular system
design, which adds another dimension of flexibility to the 3000 DAS and
allows the same set of equipment to be used for a wide variety of
different installations. Primary and Secondary Hubs use the same
chassis with their function defined by the modules inserted in them.
With as few as 4 components Zinwave's 3000 DAS can be tailored to suit
every environment and building topology in the most cost effective way.
The Primary Hub interfaces with service
sources such as base stations or repeaters via service modules, which
accept signals from any service in from 150 MHz to 2700 MHz. The
Primary Hub can connect to Secondary Hubs or direct to Remote Units or
a mixture of both.
The Secondary Hub interfaces to a
Primary Hub through an optical module. The Secondary Hub distributes to
and receives RF signals from up to 8 Remote Units.
Each Hub benefits from a switch matrix
which can be used to route specified services to particular areas
within a building or area.
Remote
Unit
| The Remote
Unit defines the final cell coverage, communicates via optical link to
Primary/Secondary Hubs and receives and amplifies signal from the users
hand held devices, laptops, mobiles phones, etc. Remote Units are
small, wall or ceiling mountable units which amplify the received
signals for transmission over a wireless link (in the case of the downlink signals) and amplify the received wireless signals for transmission over the optical link (in the case of the uplink signals). |
![]() |
Wideband
Antenna
| The Zinwave DAS system can use a variety of antennas connected to the Remote Unit via coaxial cable. The choice of Antenna will depend on the service requirement within the operational bandwidth of the system. Zinwave's wideband antenna offers a unique design for use in a wideband indoor wireless coverage system. The easily mounted antenna is delivered in an aesthetic profile that blends well within in-building environments and covers all services in the 800 MHz to 2700 MHz frequency range. | ![]() |
Zinwave 3000 system brochure
Zinwave company brochure